• Acacia melanoxylon (Blackwood)
• Silky Oak
• American Walnut
• Tasmanian Ash
• Red Gum
• Jarrah
• Treated Pine
• Cypress
• Silky Oak
• Others on request

Common finished thickness are 3 mm 4 mm and 5 mm Drum Sanded to 240 grit
Example Key Pendant aprox 40 x 30 x 5 mm

Sheets of this size laser cut to any shape required

You can supply your own drawings or request a design

You can supply your own materials

A quotation requires details of Size, Shape/s to be cut and what is to be engraved. One side or 2 side

Optional Sealing of surface prior to engraving is an optional extra.
This reduces and surface staining from wood resins during engraving.

Set up of Artwork to your approval $20-$80

This depends on the work involved with your artwork

If you are submitting drawings, Supply these as Corel, Illustrator or dxf files. Cut lines should be set to Hairline or thinner

Engraving is any Black or colour lines or solids over hairline

Grey shades are screened or Optionally 3D engraved

If 3D engraving specify depth of deepest area ( Black )

Grey shades will be proportionally less than Black.

Bit Map images should be supplied as jpg ( jpeg ) files supply at size required with 600 dpi (recommended).

• Quotation

To ensure you receive exactly what you require:-

A proof is always emailed to you prior to engraving

• Once you are happy to proceed.
• You confirm your OK
• Payment details are advised for transfer to our Account.
• Item is produced, and dispatched to you in approx 3-7 days.
  times vary depending on actual product configurations.
• Confirmation of despatch is sent to you by email .

In case of Photo images or drawing files to be included in the engraving

These you email to us and are used only for your work.
They are kept private and filled if repeat work may be required.

We may change the contrast and resolution of Photo images to maximise the engraving result